2pcs Nano V3.0,ATmega328P Microcontroller Board,Nano Board CH340G Chip 5V 16MHz with 2pcs 245mm USB Cable, Compatible with Arduino Nano V3.0 for Arduino
Note: Before running the procedure, pls install the corresponding computer system driver.
Drivers: directly from the chip manufacturer:
WCH 340 product home page: http://www.wch.cn/product/CH340.html
http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver)
The pins has been welded, you do not wish to solder it on your own.
Fully Compatible to Arduino Nano V3.0 ATmega328P-AU
Bootloader installed, ready to upload sketches from Arduino software
Operating Voltage: 5V
Input Voltage: (really useful) 7V-12V
Input Voltage: (limits) 6V-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM: 2 KB
EEPROM: 1 KB
Clock Speed: 16 MHz
Dimention: Approx. 45x17x19mm
Cable Length: 245mm
Color: Blue(as the picture shows)
2 * Nano V3.0 ATmega328P Arduino Compatible Board
2 * Mini USB Cable
Make sure this fits by entering your model number.
★Matters Need Attention: Before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/product/CH340.html; http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); http://www.wch.cn/download/CH341SER_MAC_ZIP.html; http://www.wch-ic.com/download/list.asp?id=127 (windows); http://bit.ly/2pMF4in.
★NOTE: If you wish to have it to work on a Mac, please install the diver from this: https://drive.google.com/drive/folders/1phezjJtQW0vav34RoivsAzjF0ugmqjgn?usp=sharing; If you wish to have it to work under Windows 10, You should turn off automatic updates before you install the driver, please install the diver from this: https://drive.google.com/drive/folders/1tl6sVGVduyH1JHfaYdMqeMGKdo-rg3im?usp=sharing.
★If you want an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
★Small Arduino UNO Board: This is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper; More Breadboard Space: Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
★Specification: The Nano will also be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.