– Microcontroller: Atmel ATmega328
– Architecture: AVR
– Operating voltage: 5V
– Input voltage: 7-12V
– Flash memory: 32 KB of which 2 KB used by bootloader
– SRAM: 2 KB
– Clock frequency: 16 MHz
– Analog I / O pins: 8
– EEPROM: 1 KB
– DC current per I / O pins: 40 mA (I / O pins)
– Digital I / O pins: 22
– PWM output: 6
– Power consumption: 19 mA
– Dimensions: 0.70 “x 1.70”
Input and Output
– Every of the 14 digital pins on the Nano can be utilized as an input or output, the use of pinMode(), digitalWrite(), and digitalRead() functions.
– Some pins have specialized functions: Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the CH340G USB chip.
3 X Nano Board (soldered)
3 X USB Cable
Make sure this fits by entering your model number.
The header pins has been soldered for this package and it comes with 3pcs USB Cables.
It uses the chip ATmega328P CH340 as a substitute of FT232RL. You’ll be able to start with more than a few electronic projects by the use of the Arduino software (IDE). It has the whole thing that Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
This is a smallest, complete, and breadboard friendly board and 100% compatible with the official Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
It may be powered by way of USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
This board has 22 digital inputs and outputs, and 8 analog inputs – a module with many interfaces. It is enough for most applications.